A Plant Growth System Nano is an elegant solution for precise CO2 dosage in small aquariums. CO2 addition benefits the growth of all plants and improves color development.

• A complete CO2 system with a disposable, recyclablealuminum bottle containing 95 g pressurized CO2
• A precise and stable CO2 regulation
• A 3-in-1 diffuser, which ensures a maximum CO2 efficiency

How to use the product

1. Ensure that the regulator is fully off before you mount the regulator on the CO2 cartridge.
2. Fill the diffuser chamber with water.
3. Place the cartridge in the rack, slide the suction cups on the hose and mount the hose to the regulator and the diffuser.
4. Mount the diffuser with the suction cups at the inner side of the tank near the bottom and place the hose in the back corner.
5. Leave the diffuser for 24h in the tank to ensure that the ceramic disc is fully moistened.
6. Open the regulator carefully and count the number of bubbles per minute in the diffuser chamber.
7. Wait 5 minutes, adjust and repeat until the number of bubbles per minute is similar to the recommendation in the table.

Thetableshows recommended dosage (bubbles per minute) in different tank sizes. A 95 g CO2 cartridge contains 50,000 ml CO2.

The most important nutrient for plants is CO2.

The natural CO2 level in an aquarium is 0-0.5 mg/L of water.
Even the slightest addition of CO2 can make a big difference in improving the growth and vigor of the plants.

If the aquarium contains only slow-growing Easy-plants, the addition of CO2 gas into the water should reach a level of approx. 3 mg/L to ensure good growth conditions.

ForMediumcategory plants, the CO2 requirement is approximately 10 mg/L and forAdvancedplants approx. 25 mg/L.

*) If you have a larger aquarium containing MediumorAdvancedplants, the lifetime of a nano-cartridge will be too short. In this case, we recommend a larger cylinder e.g. 2 kg refillable.

All figures are approximate.